About this product
- Made from Sunbrella® acrylic marine grade fabric will not stretch, fade or shrink
- The same fabric used to make awnings and in maritime furnishings. 100% Made in the USA.
- There are no standard size directors chairs, so please measure your current covers carefully and compare them with the measurements listed below.
- These are available in both round and flat stick styles. The stick type refers to the stick that goes in the seat to attach it to the chair. Check your sizes for these as well as our sticks may not work with your chairs. All of this information can be found below.
- Some colors are listed as Special Stock. These colors are non-returnable. Please see in the description below for more information regarding Special Stock colors.
- Load tested to 400 lbs. - Rated capacity 350 lbs. 60 day warranty on all covers - full replacement at no charge to you if it fails
Breathe new life into old chairs! Our Marine Grade Sunbrella director's chair replacement covers are easy to replace and are first quality. The Sunbrella fabric is a top choice for director chair replacement covers that will be used outdoors due to their non-fading and water-beading characteristics. Choose between round or flat stick director's chair stock sizes. The flat stick style is an additional $2 due to extra fabric being used. These are made to fit the Gold Medal Director's Chairs but do fit many other brands. Please see chart below for sizes. Please be sure to note which type stick the chair takes and make that selection in the drop down box titled "Choose Stick Type". The measurements below are of the cover sets removed from the chair, laid out on a flat surface (sticks removed), and measured from edge to edge. If uncertain about the size of cover needed, we offer this Buying Guide article on how to Purchase and Install Directors Chair Covers.
Have a Pier 1 brand of director's chair that uses the flat sticks? You are in luck! By customer reviews and feedback, we have determined that our Flat Stick cover sets do fit the Pier 1 brand's flat stick style of director's chairs. The stick type is very important here, as the same is not true with the round stick covers. Our Round Stick style of cover sets are NOT compatible with the Pier 1 brand's round stick style of director's chair. If you have a Pier 1 brand of director's chair that uses the round sticks to fasten the seat to the frame, you will need to order a custom size or contact us directly for assistance.
SPECIAL STOCK COLORS - Some of the color choices from the dropdown list are listed as "Special Stock" as it will say Special Stock beside the color name. These are special order colors that we do not typically stock. We make these from the fabric that is leftover from when an order is placed for one of the special order colors. Stock on these is strcitly limited to the quantity listed. The available quantity is listed beside the color name. For example "Special Stock - Oyster (2)" means that Oyster is one of the Special Stock colors and that we have 2 available. If more are attempted to be purchased, nothing will be transfered to the shopping cart. These colors are also treated as a special order color in the fact that they are NON-RETURNABLE. Please make sure these will fit prior to purchasing. These colors can be Imprinted but not Embroidered. This is because there is no more of the fabric available to sew on a back panel to cover the stitching caused by Embroidery.
PERSONALIZED Director’s Chair Replacement Covers: These cover sets can be personalized with either Imprinting or Embroidery using a vast range of colors and fonts! When purchasing a lighter color fabric for Imprinting please know that the imprint can shadow through and be seen from the other side. Lighter colors are fine for Imprinting on one side, but do not work as well when Imprinting both sides.
Need a logo instead? Click here to be directed to the Request A Quote submission form that can be submitted for a quote on a logo. For more information regarding personalization, please see the "Personalization Information" tab.
For more information regarding the different parts of a cover set and how to obtain measurements, check out our blog Making Sense Out of Director's Chair Covers.
Sunbrella® colors available for selection are stock colors. All other colors available by special order only for an additional $30. There is a 2 cover set minimum and returns are not accepted for special orders. Please call to special order 828-678-9660.
Please note: All monitors register color differently, please call 828-678-9660 if you have a question about a color.
ROUND STICK COVER MEASUREMENTS
- Seat measures 15 1/4" in depth by 19 1/2" in width
- Comes with two 1/4" round dowels
- Back measures 6 1/2" in height by 21 1/2" in width
FLAT STICK COVER MEASUREMENTS
- Seat measures 15 1/4" in depth by 22 1/2" in width
- Comes with two flat sticks that measure 9/16" x 1/4"
- Back measures 6 1/2" in height by 21 1/2" in width




